Kuwait
Fog is one of the scariest things to drive in, especially if you're unfamiliar with it. It is a dense "cloud bank" that rests on the ground .Here is how to drive safely in fog.
1)Increase your count distance by 5 seconds instead of the ...normal 2 seconds behind another vehicle. Never rush or speed to get out of the fog.
2)Many vehicles have fog or driving lights that were installed at the factory. These lights are usually mounted low, in or below the front bumper. They are aimed toward the ground out in front of the vehicle as far as possible. Fog lights mainly differ from driving lights in the way they project the light. Fog lights often have clear or yellow lenses; while driving lights usually have clear lenses. The beam of light created by fog lights is usually wide and flat pattern; flat to stay close the road surface and minimize reflection back by fog - and wide to better illuminate the sides of the roadway (guard rails, curbs, lines painted on the roadway, etc.). Driving lights are usually merely bright spot lights designed to pierce the night darkness further than regular headlights. While fog lights are best for foggy conditions, either type of light will likely perform better than headlights due to their low mounting point on the vehicle. Experiment using all combinations (if possible) of fog / driving lights "on" and the low beam headlights "on" or "off" to determine which setting provides the best forward visibility for the driver. Do not shut off the running or "parking" lights, as they help make your vehicle more visible to other drivers along side and behind your vehicle.
3)The visibility in front of you will sharply decrease in a fog, so use the vehicle's low beam lights (if the vehicle does not have fog lights or driving lights). Heavy fog conditions prohibit use of high beam headlights. The light from high beam headlights will be reflected back by thick fog. As fog thins, high beams can become more effective. Check periodically to see if the fog has thinned enough to make use of high beams.
4)There's a natural tendency to wander into the middle of the road when visibility gets bad. Be sure to keep yourself in your lane.
5)If it gets too difficult or thick, pull over and wait. Turning on your hazard lights alerts other drivers of where you are.
6)Don't be afraid to ask your passengers to help keep an eye out for oncoming cars and obstacles on the road
1)Increase your count distance by 5 seconds instead of the ...normal 2 seconds behind another vehicle. Never rush or speed to get out of the fog.
2)Many vehicles have fog or driving lights that were installed at the factory. These lights are usually mounted low, in or below the front bumper. They are aimed toward the ground out in front of the vehicle as far as possible. Fog lights mainly differ from driving lights in the way they project the light. Fog lights often have clear or yellow lenses; while driving lights usually have clear lenses. The beam of light created by fog lights is usually wide and flat pattern; flat to stay close the road surface and minimize reflection back by fog - and wide to better illuminate the sides of the roadway (guard rails, curbs, lines painted on the roadway, etc.). Driving lights are usually merely bright spot lights designed to pierce the night darkness further than regular headlights. While fog lights are best for foggy conditions, either type of light will likely perform better than headlights due to their low mounting point on the vehicle. Experiment using all combinations (if possible) of fog / driving lights "on" and the low beam headlights "on" or "off" to determine which setting provides the best forward visibility for the driver. Do not shut off the running or "parking" lights, as they help make your vehicle more visible to other drivers along side and behind your vehicle.
3)The visibility in front of you will sharply decrease in a fog, so use the vehicle's low beam lights (if the vehicle does not have fog lights or driving lights). Heavy fog conditions prohibit use of high beam headlights. The light from high beam headlights will be reflected back by thick fog. As fog thins, high beams can become more effective. Check periodically to see if the fog has thinned enough to make use of high beams.
4)There's a natural tendency to wander into the middle of the road when visibility gets bad. Be sure to keep yourself in your lane.
5)If it gets too difficult or thick, pull over and wait. Turning on your hazard lights alerts other drivers of where you are.
6)Don't be afraid to ask your passengers to help keep an eye out for oncoming cars and obstacles on the road
No comments:
Post a Comment